Product Description
CDZ series horizontal lathes are supplied with two programs each in metric and in inch.
It has wide machining range and sufficient CZPT , high rigidity and substantial efficiency, operation is handy, secure and reliable. Its new slide bearing patented by state with very good antivibrition and constant spindle precision and substantial machining accuracy roundness tolerance <=0.003mm, roughness value<=Ra1.6µm. CZPT ctric system of different frequency and voltage can be designed to meet the requirements of users.
Primary Technical specs and Features
SPECIFICATION | CDZ6140 | ||||
---|---|---|---|---|---|
CAPACITY | Max. swing diameter more than mattress | 400 | |||
Max. swing diameter in excess of cross slide | 210 | ||||
Max. swing diameter in excess of gap | — | ||||
Width of mattress | 400mm | ||||
Max. duration of workpiece | 2000 | ||||
SPINDLE | Spindle nose | C6 | |||
Spindle bore diameter | 52mm | ||||
Taper of spindle bore | Morse No.six | ||||
Variety of spindle velocity | 12-1000r/min 24 Varieties | ||||
FEEDS | Longitudinal feeds selection | 0.082-1.586mm/r 35 Kinds | |||
Trasversda feeds variety | 0.571-.529mm/r 35 Kinds | ||||
Metric threads selection | 1-192mm fifty seven Types | ||||
Inch threads range | 2-24teeth/inch thirty Types | ||||
Module threads selection | 0.25-48mm forty Sorts | ||||
Pitch threads assortment | 1-96teeth/inch 37 Kinds | ||||
TAILSTOCK | Morsetaper of tailstock sleeve | Morse No.4 | |||
Travel of tailstock sleeve | 150mm | ||||
Diameter of tailstock sleeve | 70mm | ||||
MOTOR | Primary motor CZPT | 5.5kw | |||
Quick motor CZPT | 0.25kw | ||||
Great pump CZPT | 0.125kw |
Stand Accessories
1.A few jaw chuck/one particular established 2.Morse No.4/6 center bush/1 established 3.MT No.4 center/two sets 4.Oil gun/one particular set 5.Equipment/one particular established 6.Basis screws/one established 7.Wedge nuts/a single established
Unique Equipment
1.Steady support2.Stick to rest3.Splash guarc4.Five-placement feed end drum5.Taper coping device6.Four jaw chuck7.Face plate8.Generate plate 9.T-variety toolpost10.Chasing dial gadget
The suggested materials for the worm are hardened metal and bronze for the worm gear. Nevertheless, based on the application, unhardened steel worms can run adequately and a lot more economically on forged iron worm gears rated at fifty%. In addition to metal and hardened steel, worms are obtainable in stainless steel, aluminum, bronze, and nylon worm gears are accessible in metal, hardened steel, stainless steel, aluminum, nylon, and non-metallic (phenolic).